SPOT 4.1 Basic and Advanced Software Manual for SPOT Insight ...

Ch. 8 - Viewing, Editing, and Annotating ImagesAppend ImageAdd an image to the end of the sequence. Using Append Image, you canadd an image to a sequence from one of three sources:• Currently Open Document – Add an image from the currentlyopen sequence file. Make sure to specify the Sequence Index – i.e.,the number of the image in the sequence.• File – Add an image from disk. If the image comes from a sequencefile, make sure to specify the Sequence Index.• Database (Windows) – Add an image from a SPOT database. Todetermine the Image ID, open the database and use the Searchoption. The search results table displays the Image ID for eachrecord.Remove ImagesRemove an image or images from a sequence file. Removing an imagedeletes the image from the sequence, which is automatically reordered.Click on Remove Images and enter the number of the image(s) that youwant to extract. To extract multiple images from a sequence, separatenumbers with commas and/or dashes - i.e., 5, 6, 7 or 5-7 or 1 – 5, 6, 9.Move ImagesMove an image or image(s) to a different point in the sequence. Clickon Move Image and enter the number(s) of the image(s) that you want tomove. To move multiple images from a sequence, separate numberswith commas and/or dashes - i.e., 5, 6, 7 or 5-7 or 1 – 5, 6, 9.Play ForwardPlay ReverseStop Play/Resume PlayStep ForwardStep ReverseContinuously play the image sequence forward.Continuously play the image sequence backward.Stop play if the sequence is running; resume play when it is stopped.Move forward one image.Move backward one image.User Guide to the SPOT Insight Camera 137