SPOT 4.1 Basic and Advanced Software Manual for SPOT Insight ...

Ch. 4 - The Advanced Program ModeReloadReload the image from diskPrintPrint the imageRefer to Ch. 8 – Viewing, Editing, and Annotating Images and Ch. 11 - Printing Images, for more details.The Status BarThe status bar, which appears at the bottom of your screen, displays information about the image that is onscreen. The following is an illustration of the view status bar, as it appears for an open image:ImagesizePixel bit depth(bits per pixel)X Y pixelcoordinatesBrightnessvaluesSizesettingsModifiedstatusImageSetupFigure 4- 1: Advanced Mode Status BarNote: The status bar displays values for captured images, not for live imagesEach of the call-outs is described below.• Image size – The number of columns by the number of rows of pixels in the image.• Pixel bit depth (bits per pixel - bpp) - The pixel bit depth of the image. There are four options:−−−−8 bpp (monochrome) – Insight B/W12 bpp (monochrome) – Insight B/W24 bpp (RGB color) – Insight Color Mosaic & 3-Shot36 bpp (RGB color) - Insight Color Mosaic & 3-ShotFor a detailed discussion of pixel bit depth, refer to Ch. 5 - Preparing to Take a Picture.• X Y pixel coordinates - As you move your cursor over an image, the status bar displays the x ycoordinates of the cursor in pixels. For example, the values for the upper left corner pixel would be(0,0).• Brightness values - As you move your cursor over an image, the status bar indicates the pixelbrightness values at the indicated x y pixel coordinates. The values depend on the pixel bit depth (seeCh. 5 – Preparing to Take a Picture) for the image. For example, if a color image is open, the statusbar displays separate red, green, and blue brightness values [e.g., RGB: (226, 193, 174)]. If amonochrome image is open, the status bar displays only one brightness value [e.g., (176)].• Size Settings - In the illustration above, the view status bar displays Fit to Win (Fit to Window), thedefault image capture setting.−−If the Fit to Window option has been deselected, this area displays the word Normal.If you are in zoom mode, this area displays the magnification level (e.g., 100%, 200%…)• Modified Status - If you open an image file or take a picture, the section to the right of themagnification setting will read “New” until you modify that image. Once that image has beenmodified, the word Modified appears here. Use the Undo command to return to the New state.66 User Guide to the SPOT Insight Camera