SPOT 4.1 Basic and Advanced Software Manual for SPOT Insight ...

Installation GuidelinesWhat is in the BoxIn addition to the manual, the shipping box should contain the following items:• Camera head with a dust cap• Power supply (with cable to camera)• Power cord for the power supply• 6 pin to 6 pin FireWire (IEEE 1394a) data cable to connect the camera to the FireWire port on thecomputer (10 feet long)• One CD-R that contains:− The software required to operate the SPOT camera.− A PDF (portable document format) version of the user manual, User Guide to the SPOT Insight−FireWire Camera.The Adobe Acrobat Reader software that is required to read and/or print the user's manual. Referto “Using SPOT On-line Documentation” below for instructions on installing the Reader on yourcomputer.• A registration card (you may also register online at www.diaginc.com/camreg.htm)• 2 year limited warrantyInstalling the SoftwareThe CD disk provided with your Insight FireWire camera contains the SPOT 4.1 software, which can beused with:• Windows 98SE (second edition)/2000/ME/XP/2003• Mac OS10.1 or higherSPOT 4.1 software will not support Mac OS 9 or below for the Insight Firewire cameras orany other cameras. Diagnostic Instruments suggests considering an upgrade to thoseOperating Systems in order to take full advantage of the new features found in SPOT 4.1software.SPOT 4.1 software will not support SPOT (Gen 1), SPOT Jr., or SPOT Enhanced Cameras.Note: In some instances, on older model computer systems, Diagnostic Instruments has foundthat SPOT users with the Windows 2000 operating system will get a No response fromcamera… message when trying to either capture an image or view a live image. This is due toincorrect BIOS settings. For information on correcting this problem, refer to Appendix D:Selected Error Messages.User Guide to the SPOT Insight Camera 13