SPOT 4.1 Basic and Advanced Software Manual for SPOT Insight ...

Ch. 10 - ReportingDefining View OptionsThe View menu provides you with eight options, each of which is described on the following pages.Zoom in or out to six different sizes. From the View menu, select Zoom and enter the desiredZoompercentage.LevelFirst PagePreviousPageNext PageLast PageSet DisplayGrid SizeGo to the first page in the report. (only available when multiple report pages have been created)Go back one page in the report. (only available when multiple report pages have been created)Go forward one page in the report. (only available when multiple report pages have been created)Go to the last page in the report. (only available when multiple report pages have been created)The report definition window includes an adjustable grid (i.e., the dots on the screen) to assist youin placing and aligning report objects on the report page. By default, the grid is turned on. Toturn off or modify the grid, follow these steps:1. From the View menu, select Set Display Grid Size.Set ObjectGrid Size− To turn off the display grid, deselect the Show Grid box.− To modify the spacing follow steps two through four.2. Select either inches or millimeters.3. Enter the spacing for the display grid. The number that you enter represents the space ininches or millimeters between the dots on the grid.− If the measurement is inches, enter a number between .04 and 10.− If the measurement is in millimeters, enter a number between 1 and 25.4. Click on OK. The display grid appears.In addition to the display grid, you can define a second grid specific to report objects. The objectgrid controls the movement of objects as you work with them on the display grid. When youselect a report object and move it, the object automatically “snaps” to the nearest line in theobject grid, allowing you to more precisely align and arrange the objects on your report page.1. From the View menu, select Set Object Grid Size.2. If desired, check the Snap to Grid option.3. Define the spacing for the object grid. In many cases, the object grid and the display gridwill have the same spacing. In other cases, you might not want the display grid to be asfinely spaced as the object grid (i.e., so the dots do not interfere with the view of the reportdefinition window).− If the measurement is inches, enter a number between .04 and 10.− If the measurement is in millimeters, enter a number between 1 and 25.(The measurment values will convert automatically as you toggle between English andmetric units)The default spacing value for the Object Grid is the last entered value.4. Click on OK.User Guide to the SPOT Insight Camera 203