C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Support Service Expiration Information DisplaySupport Service Expiration Information DisplayIf your software service agreement (SSA) is due to expire in 30 days or less,the dialog box shown in Figure 2-35 on page 2-78 opens automatically whenyou log into the Monitoring Station.Figure 2-35: Software Support Agreement InformationNOTEThe default expiration display time period is 30 days. This value is set bythe SSAWarnPeriodDays parameter in the Monitor Station section of theDiag System (CCURE System Setup). See Appendix A in theC•CURE 800/8000 Installation Guide for information on how to change thisparameter.To stop the dialog box from displaying each time someone logs into theMonitoring Station, check the Do not display this dialog again box. Thedialog box will not display automatically again until the SSA has beenrenewed and the SSA is again within the 30-day expiration time frame.Click Done to close the dialog box.You can always see information about the SSA agreement and the expirationdate on the Monitoring Station About window, shown in Figure 2-36 onpage 2-79.2–78 C•CURE 800/8000 Monitoring Station User Guide