C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Viewing ImagesViewing ImagesYou can configure if and how images for personnel are displayed at theMonitoring Station using the Imaging > Setup command on the Optionsmenu shown in Figure 2-11 on page 2-35.The options for displaying images are as follows.Table 3-38: Options for Image DisplayChoose this option...Auto-display on admitAuto-display on rejectSetupSet image file directoryTo...Automatically display a person’s image when the systemadmits that person.Automatically display a person’s image when the systemrejects an access attempt by that person.Open the Image Setup dialog box where you can configurehow images of personnel are displayed at the MonitoringStation.Set the directory location where image files are stored. See“Set Image File Directory” on page 3-103NOTEYou can set options in the [CCentral] section of the CCURE.INI file to dothe following:• Suppress the display of cardholder images on very busy systems toprevent system slow down.• Suppress the refreshing of every cardholder image, whether currentor not, to improve system efficiency.See Appendix A, “Using the Diagnostics System Utility,” in the C•CURE800/8000 Installation Guide.C•CURE 800/8000 Monitoring Station User Guide 3–101