C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Performing Manual Actions on Security ObjectsTable 3-20: Activating Event Dialog Box FieldsBoxFrom/ToTime ZonePriorityNoteThis action affectsan object on adialup apC. Thismanual actionmay be delayed.DescriptionDisplays the time span for this manual action.Enter the date and time in MM/DD/YY HH:MM format.NOTE: Latch/Unlatch actions begin as soon as you click OK and close the dialog box, and they haveno end times.Specify a time zone for this manual action. The default time zones are as follows:If you are performing a manual action on an object, the time zone defaults to the object’s time zone. Ifthe object does not have a time zone, the time zone defaults to that of the client machine.If the manual action is on a group and the group has only one time zone associated with it, the timezone defaults to the group’s time zone. If the group has more than one time zone associated with it, thetime zone defaults to that of the client machine. In the second case, a message displays in the dialogbox.If you select [Client local time zone] in this drop-down list, the manual action occurs in the time zoneof the client machine’s operating system.Displays the priority level for this manual action. Priorities let you set the order of manual actions actingon objects and override causes already acting on objects.For example, Event 1 (priority level: 50) disarms an input. To temporarily arm the input, use the ArmInput dialog box to set the manual action’s priority to greater than 50 so that it will override Event 1’spriority.Displays additional information about an action. This note appears on the Manual Actions Detail andManual Actions dialog boxes, and in the journal.This message appears when you perform manual actions on objects on dialup apCs. These manualactions may be delayed.C•CURE 800/8000 Monitoring Station User Guide 3–59