C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Manipulating Configured Guard ToursManipulating Configured Guard ToursYou can do the following in the Configured Guard Tours dialog box:• View a list of the guard tours that are currently configured and online inC•CURE 800/8000 along with information about each tour of a specificname and configuration.• Select a tour to start it.• Access a list of active guard tours.The dialog box shows only the guard tours and manual actions to which yourMonitoring Privileges gives you access. The priority level you can assign to anaction is also controlled by your Monitoring Privileges.NOTEOn systems with the Central Monitoring Station option and more than oneserver, the dialog box title shows the name of the server that applies to theconfigured guard tours displayed.Example:The dialog box title will be similar to the following:“Configured Guard Tours Selected from Server [name]”NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.To Display the Configured Guard Tours Dialog BoxClick Configured Guard Tours from the Non-hardware Status menu. TheConfigured Guard Tours dialog box appears with information similar to thatshown in Figure 3-15 on page 3-45.3–44 C•CURE 800/8000 Monitoring Station User Guide