C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Connecting Dialup iSTAR ControllersConnecting Dialup iSTAR ControllersThe Status dialog box for dialup controllers lets you do the following:• View the causes and manual actions affecting dialup controllers.• Connect dialup controllers to the C•CURE 800/8000 host.• Download the latest firmware version on the hard drive to the flash ROMin iSTAR controllers.The Status dialog box is not available for controllers connected to the host bynetwork or serial communications.NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.To display the Status dialog box for dialup controllersIn the Controllers dialog box, select a dialup controller and click the ShowCauses button. The Status dialog box for the dialup controller appears withinformation similar to that shown in Figure 3-27 on page 3-73.3–72 C•CURE 800/8000 Monitoring Station User Guide