C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Status Dialog Box for EventsStatus Dialog Box for EventsThe Status dialog box for events is used to check the status of a single eventand to manually arm, disarm, activate, or deactivate the event.To View the Status Dialog Box for an EventDo one of the following:• In the Event Monitor, select the event tile and press F2 or select Status ofselected object from the View menu.• In the Review Event dialog box for the event, click Show Causes.• In the Events dialog box, select an event and click Show Causes.• In the Status dialog box for an event, shown in Figure 4-6 on page 4-18,select an event from the cause list and click the Show causes of selectedbutton.Figure 4-6: Example of a Status dialog box for EventsThe Status dialog box for events contains the items described in Table 4-4 onpage 4-19.4–18 C•CURE 800/8000 Monitoring Station User Guide