C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Arming, Disarming, and Viewing InputsThe Status dialog box for inputs contains the following items.Table 3-34: Status Dialog Box for Inputs Fields and ButtonsItemInput StateList of Input CausesDescriptionDisplays whether the input is active, inactive, in supervision error, armed, or disarmed.If you add an input to an intrusion zone or put the intrusion zone online, then you cannot Arm,Disarm or use the Show causes of selected button to show the input. The input’s default stategoes to that of the intrusion zone, such as Disarmed/Disarmed. An input that is part of anintrusion zone cannot be Armed or Disarmed by clicking the Manual Actions button or the Showcauses of selected button.If you remove an input from an intrusion zone, the input returns to its default state, which is eitherArmed or Disarmed, depending on how it was originally configured.Lists all causes for the input state, including manual actions, events that caused the input to be inits current state, as well as the input’s default state.For each entry in the list, the system displays the action, the date and time the action took place,and the priority of the item within the list. By default, causes are listed in order of priority, exceptwhen the priorities are equal. In that case, they are listed by time. See “Checking the Status of anActivity” on page 3-6 for an explanation of causes.To resize columns, drag the separator for the column’s list control to the width you want, or doubleclickon the separator to automatically resize the column to fit the largest item in the column.ButtonsArmDisarmShow causes ofselectedCancel selectedmanual actionManually arms the input whose name appears in the title bar. See “Performing Manual Actions onSecurity Objects” on page 3-56 for more information.Manually disarms the input whose name appears in the title bar. See “Performing Manual Actionson Security Objects” on page 3-56 for more information.Displays the Status dialog box for the selected event in the input’s cause list. If you do not haveprivileges to view the event, the Show causes of selected button appears dimmed when youselect the event in the list; you cannot open the Status dialog box for the eventIf you have the appropriate privileges, you can also double-click on an event in the list to display itsStatus dialog box.Allows you to cancel or view details of the selected manual action using the Manual ActionsDetail dialog box.You can also double-click on manual action to view the Manual Actions Detail dialog box.3–94 C•CURE 800/8000 Monitoring Station User Guide