C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Adding Color to Monitoring Station Messages2. For each message type to which you want to assign a color, click themessage type (such as Duress messages) in the Color ActivatedMessages box and click the Select Color button A Color Selection dialogbox appears displaying the colors available (Figure 2-31 on page 2-71).Click the color you want to assign.3. Click OK. The Monitoring Station window displays the selected messagetype in the selected color.Example:If you set Duress Messages to appear in red, the Monitoring Stationwindow displays all Duress Messages in red.If a message includes more than one message type, the message’s color isdetermined by message type priority. For more information, see the nextsection.Priority Levels for Colorized MessagesWhen a colorized message includes more than one message type, themessage’s color is determined by the following priority levels for messagetypes:• Duress Message - High Priority. Messages that include the duressmessage type always display the color for duress messages.• Noticed Message - Medium Priority. Messages that include the noticedmessage type display the color for noticed messages only when themessage does not include duress messages.• Rejected Message - Low Priority. Messages that include the rejectedmessage type display the color for rejected messages only when themessage does not include duress or noticed messages.Example:If red is assigned to duress messages, green to noticed messages, andorange to rejected messages, the following colors are displayed:• Duress and Noticed Message - Red• Duress and Rejected Message - Red• Noticed and Rejected Message - Green• Rejected Message - OrangeC•CURE 800/8000 Monitoring Station User Guide 2–69