C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Starting Guard ToursStarting Guard ToursFrom the Start Guard Tour dialog box you can do the following:• Select a guard to walk the guard tour• Assign a priority level to the tour• Actually start the tour runningPriority Levels for Guard Tour ActionsThe following Priority levels are assigned to guard tour actions:• The Start Guard Tour action’s priority is set as a user-selectable value inthe Start Guard Tour dialog box.• The priority of the other guard tour actions is set according to themaximum priority allowed by the Monitoring Privileges of the userinitiating the action. Users cannot cancel, suspend, or resume a guard tourthat was started with a higher priority level than the maximum priorityallowed by their Monitoring Privileges.Example:Your Monitoring Privileges allow you to assign a maximum prioritylevel of 100. Consequently, you cannot cancel Guard Tour #4 which hasa priority level of 200, but can resume the suspended Guard Tour #9which has a priority level of 75.• The priority level for guard tours initiated at a reader at guard tour stop#1, configured on the Guard Tour Stop Select dialog box in the C•CURE800/8000 Administration application, is automatically set by the defaultpriority value in Diag System.NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.3–46 C•CURE 800/8000 Monitoring Station User Guide