C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

NetVue Alarm GroupsNetVue Alarm GroupsFrom the NetVue Alarm Groups dialog box, you can arm or disarm thealarms in a selected NetVue Alarm group for a specified period of time.NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the username and password of a privileged user and clickthe Login button on the Manual Action Challenge dialog box to completethe manual action.Manual Action Challenge is enabled or disabled using the ConfigureMonitoring Privilege dialog box in the Administration client.For more information, see “Performing Manual Actions on SecurityObjects” on page 3-56.To Arm a NetVue alarm group1. Select the NetVue Alarm group in the list.2. Click Arm Selected. The Arm Group dialog box appears.3. Select or type the Arm start time and date in the From boxes.4. Select or type the Arm end time and date in the To boxes.5. Select the Time Zone.6. Select the Priority for this action in the Priority list.7. Type a note for future reference in the Note field.8. Click OK to accept the change, or click Cancel to cancel the action.To Disarm a NetVue alarm group1. Select the NetVue Alarm group in the list.2. Click Disarm Selected. The Disarm Group dialog appears.3. Select or type the Disarm start time and date in the From boxes.7–14 C•CURE 800/8000 Monitoring Station User Guide