C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Manipulating OutputsTable 3-37: Outputs Dialog Box Fields and ButtonsBoxOutput ListSelectionDescriptionDisplays a list of outputs that are currently configured as online and operational and to which you haveprivileges.If the panel to which the output is attached is offline, the output is offline.This list includes the output name and current state of outputs that are configured as online and are notADA Relay, Door Latch Relay, or Elevator button outputs.Lets you select the outputs you view based on the active state of the output. Possible choices are Activeonly, Inactive only, and Both.ButtonsShow CausesPulse selectedActivateselectedDeactivateselectedSect an item from the outputs list and click this button to display a Status dialog box for the output.You can also open the dialog box by double-clicking on an output.Select an item from the output list and click this button to pulse the selected output for a specified periodof time. The system administrator configures the pulse time. See “Configuring Outputs” in the C•CURE800/8000 Administration Client Online Help for more information.If the output is on a dialup panel, it may not pulse immediately.Select an item from the output list and click this button to activate the selected output for a specifiedperiod of time. See “Performing Manual Actions on Security Objects” on page 3-56 for more information.Select an item from the output list and click this button to deactivate the selected output for a specifiedperiod of time. See “Performing Manual Actions on Security Objects” on page 3-56 for more information.3–100 C•CURE 800/8000 Monitoring Station User Guide