C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Glossarycontroller IDThe 32-bit IP Address of each General Controller Module that uniquelyidentifies each iSTAR.controller orcluster member(slave)An iSTAR Controller that is connected to a master controller within a cluster.deactivateTo cause a security object to become inactive.dialup apCs, apC/8Xs, and apC/Ls that communicate with the C•CURE 800/8000host via standard telephone lines and Software House provided Multitechmodems. These panels are connected to the host only when a telephoneconnection has been established. See also direct connect.digitalRelated to digits or the way they are represented. In computing, analogous tobinary because the computers familiar to most people process informationcoded as combinations of binary digits (bits).digital videocamerasNetVue provides independent camera configuration, which includes cameraname (up to 32 characters), description, maximum pre-alarm time, andmaximum post-alarm time.NetVue also provides independent camera controls, including pan and tiltzoom controls, as available. (Not available for Intellex version 2.1). NetVuerecognizes the digital video server (DVS) and channel to which the camera isconnected.digital videoservers (DVS)NetVue is a scalable system, so different digital video systems may be used. Itis necessary for users to obtain the appropriate license for each supportedvideo server system in their configuration. Currently, Nice System version2.0, Intellex System version 3.1, Loronix version 4.0, and Pelco version 3.2.3are supported.direct cableconnectionA link between the I/O ports of two computers using a single cable ratherthan a modem or other active interface device.Glossary–10C•CURE 800/8000 Monitoring Station User Guide