C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Arming, Disarming, and Viewing InputsArming, Disarming, and Viewing InputsYou can use the Status dialog box for inputs to manually arm or disarminputs, as well as to view the status of inputs. If the input is already active, thedialog box displays the time of activation.NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.To Display the Status Dialog Box for InputsDo one of the following:• Click the Input icon from the appropriate tile on the General ActivityMonitor- or -• Select the desired tile on the General Activity Monitor and press F2- or -• In the Inputs dialog box, select the input and click Show Causes.A Status dialog box for inputs appears with information similar to that shownin Figure 3-35 on page 3-93.Figure 3-35: Example of a Status Dialog Box for InputsC•CURE 800/8000 Monitoring Station User Guide 3–93