C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Launching a Third-Party Application5. Click Apply Changes and Quit to edit the Diag System and exit. Thepreceding steps create a User Program button on the Monitoring Stationtool bar and a Run User Process command on the Monitoring StationOptions menu.To Launch the Third-party Application1. Open the Monitoring Station.2. Click the Run User Process button on the tool bar or choose the Optionsmenu and select Run User Process, as shown in Figure 2-37 on page 2-81.The third-party application starts.Figure 2-37: Run User Process CommandExample:Figure 2-38 on page 2-82 shows Microsoft Paint launched from theActivity Monitor, using the Run User Process menu command.C•CURE 800/8000 Monitoring Station User Guide 2–81