C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Status Dialog Box for EventsTable 4-4: Status Dialog for EventsBoxCurrent UserStateMisc InfoAlarm CountActive CausesIncident IDCauses ofActivationStateCauses ofArm StateDescriptionDisplays the name of the user currently logged in to the Monitor station.Displays the event’s current state: Active, Inactive, Active Causes(whether or not the event has active causes), Armed, Disarmed, or NeedsAcknowledgement.Displays whether the event is configured as Acknowledgment clearsevent regardless of active causes.The activation count of the event. For each event the activation count tracksthe number of times an event is fired from the initial activation up until thetime the event is cleared.The active causes of the event.The current Incident ID if the event is currently active or the Incident ID ofthe last incident if the event is currently inactive.This field is displayed if Incident ID is enabled. Incident ID is disabled bydefault. To enable Incident ID, select “Driver” in the Settings in theCCURE.INI Section and “UseEventIncidentId” in Entry in the Diag utility andset Entry Value to 1. For more information see the Diag System help.You can copy the Incident ID to the clipboard to paste the Incident ID intothe Incident ID field on the Incident Tab in the Journal Replay dialog boxin the Administration application. To copy the Incident ID, select the IncidentID, right click the mouse and select Copy from the popup menu.Lists the causes that cause this event to be active, including time specs,manual actions, inputs, other events, related door activity, and the defaultstate. If you do not have the appropriate privileges to view the status of acause, the Show causes of selected button is not available when youselect the cause in the list.Also displays the date and time the event became active, and the event’spriority. The causes are listed in order of priority.Lists the causes of the armed or disarmed state of events, including manualactions, time specs, or other events.Also displays the date and time the event was armed, and the priority of theevent.ButtonsActivateActivates the event whose name appears in the title bar of this dialog box. Ifan Activation Delay time is set for the event, the event activates after thedelay time expires. See the C•CURE 800/8000 Software ConfigurationGuide for more information.C•CURE 800/8000 Monitoring Station User Guide 4–19