C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Activating, Deactivating, Pulsing, or Viewing OutputsActivating, Deactivating, Pulsing, or Viewing OutputsYou can use the Status dialog box for outputs to manually activate,deactivate, or pulse outputs, as well as to view the status of outputs.NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.To Display the Status Dialog Box for OutputsDo one of the following:• Click an output icon from its tile on the General Activity Monitor- or -• Select the desired tile from the General Activity Monitor and press F2- or -• In the Outputs dialog box, select the output and click Show Causes.The Status dialog box for the output appears with information similar to thatshown in Figure 3-37 on page 3-97.Figure 3-37: Example of a Status Dialog Box for OutputsC•CURE 800/8000 Monitoring Station User Guide 3–97