C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Enabling the Monitoring Station Split WindowEnabling the Monitoring Station Split WindowTo split the C•CURE Monitoring Station window between the GeneralActivity Monitor and the Event Monitor so you can view them both at thesame time, you must change the value of the New Event Screen entry in theDiag CCURE program.To Enable the Monitoring Station Split Window1. Click Start> Programs>CCURE System Diagnostics, and click DiagSystem. After a wait of up to one minute, the CCURE System Setup(Diag CCURE) dialog box opens, shown in Figure 2-17 on page 2-44.Figure 2-17: CCURE System Setup (Diag CCURE) Dialog Box2. In the Section box, select MonitorStation and then select the New EventScreen entry. The Entry box in Figure 2-18 on page 2-45 displays MonitorStation entries with the New Event Screen entry selected.2–44 C•CURE 800/8000 Monitoring Station User Guide