C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Controlling Access to Elevators and FloorsControlling Access to Elevators and FloorsThe Elevator Buttons dialog box lets you control access to and view the statusof Elevator buttons (elevator/floor combinations).NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.To Display the Elevator Buttons Dialog BoxDo one of the following:• Click the Elevator button icon in the General Activity Monitor. Theelevator and floor are selected when the Elevator Buttons dialog boxopens, or• In the Elevators dialog box, select an elevator and click the ElevatorButtons button. Only the elevator is selected when the Elevator Buttonsdialog box opens, or• In the Elevators dialog box with no elevators selected, click the ElevatorButtons button. No elevators or floors are selected when the ElevatorButtons dialog box opens, or• Select Elevator Buttons from the Non-hardware Status menu. Noelevators or floors are selected when the Elevator Buttons dialog boxopens.The Elevator Buttons dialog box appears with information similar to thatshown in Figure 3-7 on page 3-23 (no elevators or floors are selected).3–22 C•CURE 800/8000 Monitoring Station User Guide