C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Monitoring Station Tool BarMonitoring Station Tool BarThe tool bar, shown in Figure 2-7 on page 2-21, lets you quickly initiateMonitoring Station functions.Figure 2-7: Monitoring Station Tool BarTo display the tool bar, choose Tool Bar from the View menu so that a checkmark appears next to the Tool Bar command. To hide the tool bar, choose theTool Bar command again.Pointing the cursor at each tool bar button displays a tip on the button’s use.Table 2-4: Monitoring Station ToolbarClick...To...Scroll to the top or bottom of the list of tiles in the MonitoringStation window.You can also use the Go To command on the View menu to scrollthe Monitoring Station window. Go To lets you scroll to the highestpriority event (only on the Events Monitor), the next page, theprevious page, the first page, and the last page. You can also use thePg Dn and Pg Up keys.Open the Events dialog box where you can select from a list ofonline events to view an event’s status or perform manual actions onevents.Open the Doors dialog box where you can select from a list of onlinedoors to view a door’s status or perform manual actions on doors.Open the Inputs dialog box where you can select from a list ofonline inputs to view an input’s status or perform manual actions oninputs.Open the Outputs dialog box where you can select from a list ofonline outputs to view an output’s status or perform manual actionson outputs.Open the Manual Actions dialog box where you view the status ofactive and scheduled manual actions.C•CURE 800/8000 Monitoring Station User Guide 2–21