C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Tiles and IconsStatus dialog boxes contain the following elements:• Information about a security object’s current state (in the example shownabove, the door is locked)• A list of causes or actions (called the cause list) associated with thesecurity object’s conditionThe Monitoring Station lists the causes in order of priority. Thus, thetopmost cause on the list is the cause currently controlling the securityobject. The next cause in the list, if it is still active, will take over once thetopmost action resets. The last cause on the list shows the object’s defaultstate.• Show Causes of Selected buttonYou can use this button to display a Status dialog box for the highlightedcause in the cause list. Your Monitoring Station privilege determines thecauses you can view. If the cause is an object to which you do not haveaccess, the button is unavailable when you highlight the cause. Thebutton is also unavailable if the highlighted cause is not a security object(if it is a manual action or time specification, for example).• Cancel Selected Manual Action buttonYou can use this button to display the Manual Actions Detail dialog boxfor the highlighted cause in the cause list. The Manual Actions Detaildialog box lets you view the status of manual actions and cancel manualactions. This button is unavailable if the highlighted cause is not a manualaction. Your Monitoring Station privilege also determines whether or notyou can view this dialog box and/or cancel manual actions. You cancancel only manual actions that:• You can also initiate.• Have a priority level lower than or equal to the priority level yourmonitoring privilege permits you to assign.C•CURE 800/8000 Monitoring Station User Guide 2–33