C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Checking the Status of iSTAR ControllersChecking the Status of iSTAR ControllersThe Controllers dialog box lets you check the status of direct-connect anddialup controllers, connect dialup controllers to the host, and download thelatest firmware version on the hard drive to the flash ROM in iSTARcontrollers.NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.To Display the Controllers Dialog BoxDo one of the following:• Click the Controller icon from its tile on the General Activity Monitor- or -• Select the desired tile from the General Activity Monitor and press F2- or -• Choose Controllers from the Hardware Status menu.The Controllers dialog box opens, similar to the dialog box in Figure 3-27 onpage 3-73.The Controllers dialog box contains the items shown in Table 3-26 onpage 3-77.3–76 C•CURE 800/8000 Monitoring Station User Guide