C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Checking the Status of DoorsChecking the Status of DoorsYou can monitor door activity using the Status dialog box for doors, whichallows you to lock, unlock, or momentarily unlock a door. You can alsomonitor the reader PIN mode status for the door’s readers, and require ordisable PIN mode entry.NOTEYou cannot secure doors, configure an event, or add Secure Door to theevent’s action list from the Monitoring Station. See the C•CURE AdvancedUser Guide for information.To Display the Status Dialog Box for DoorsDo one of the following:• Click a door icon from its tile on the General Activity Monitor- or -• Select the desired tile from the General Activity Monitor and press F2- or -• In the Doors dialog box, select a door and click Show Causes.The Status dialog box for doors appears with information similar to thatshown in Figure 3-3 on page 3-10. Depending upon the door’s configuration,the dialog box has up to five tabs, labeled Door State Causes, In ReaderCauses, Out Reader Causes, Monitoring Causes, and Monitoring States.NOTEIf Manual Action Challenge is enabled and you attempt a manual action inthe Monitoring Station, a Manual Action Challenge dialog box appears.You must enter the user name and password of a privileged user and clickthe Login button on this dialog box to complete the manual action. See“Manual Action Challenge” on page 3-64 for more information.The top of the Status dialog box for doors (see Figure 3-2 on page 3-6)contains the items described in Table 3-1 on page 3-9.3–8 C•CURE 800/8000 Monitoring Station User Guide