C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Acknowledging EventsFigure 4-2: Review Event Dialog Box2. Review the information in the Event Status box to determine the actionsyou need to perform on the event (for example, acknowledging the eventor logging a message).3. If a log message is required (see Event State in the Event Status box todetermine whether you need to log a message for the event), click the Lognew message button. The Log Message dialog box appears, as shown inFigure 2-33 on page 2-75.• In the large text box, enter a message to indicate what action was takenas a result of the event activation and then click OK.4. In the Review Event dialog box, follow any instructions listed in theInstructions box.5. To acknowledge the event, click the Acknowledge button. If the event hasactive causes and the Allow acknowledgement while inputs are activeflag is not set, you cannot acknowledge the event until the active causesfor the event reset.4–8 C•CURE 800/8000 Monitoring Station User Guide