C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Status BarStatus BarThe Status Bar, as shown in Figure 2-16 on page 2-42, appears at the bottom ofthe Monitoring Station window.To display the status bar, select Status Bar from the View menu so that acheck mark appears next to the Status Bar command; to hide the status bar,select the Status Bar command again.Figure 2-16: Status BarThe status bar displays help about the current operation, as well as EventCounts, Network Connection Messages, and the current date and time.Event CountsThe Events Counts information (both Active and Unacknowledged events) isdisplayed on the right-hand side of the Status bar. Table 2-7 on page 2-42describes the Event Counts options.Table 2-7: Event Count OptionsCountsActiveUnACK’d(unacknowledged)MeaningAn Active event is one that needs acknowledgment and/or hasactive causes. This count includes events whose causes have beendeactivated, but still require acknowledgment. (The event itself isstill active.)This count does not include Acknowledged events that wereconfigured with the Acknowledgment clears event regardlessof active causes option, or events configured without checking theAnnunciate this event box. For information see Chapter 7,“Events” in the C•CURE 800/8000 Software Configuration Guide.The number of events that currently require acknowledgment.2–42 C•CURE 800/8000 Monitoring Station User Guide