C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Checking the Status of Doors2. Click the door in the door list that you want to monitor.3. Click Show Causes.4. Click the Monitoring Causes tab.5. In the Cause Selection list, click the cause you want to adjust.Example:Lock tamper alarms6. Under Manual Actions, the buttons change to display the appropriateactionsExample:Enable Lock Tamper Alarms and Disable Lock Tamper Alarms7. Click the button for the action you wish to take.Example:Enable Lock Tamper Alarms8. A dialog displays that allows you to set the start (From) and end (To)times for this cause to be enabled or disabled, the priority for this cause,and a text box to add a notation.9. When you have set the time and priority, click OK to complete theprocess.Monitoring Status TabThe Monitoring Status tab is available for doors with advanced monitoringenabled. This tab lets you filter the list of alarms for this door based on thefollowing criteria:Active StateClick on one of these radio buttons to show alarms according to their state:All — Displays all alarms in the list regardless of their state of activity (active,inactive, or supervision error).Active only — Displays only door alarms that are active.3–14 C•CURE 800/8000 Monitoring Station User Guide