C•CURE 800/8000 Monitoring Station Guide - Tyco Security Products

Checking Personnel Counts in a Security AreaTable 3-10: Status Dialog Box for Areas Fields and Buttons, continuedBox/ButtonsSupervision Counts forAreaShow Causes ofSelectedManual Actions forAreaSet count toCount valueManual Actions forSelectedSet count toCount valueManual Actions forSelectedSet count toCount valueDescriptionLists the four special classes of personnel types allowed to be in this security area as configuredon the Configure Area dialog box in the Administration application.For each class entry in the list, the system displays the name, count, cause, action, the date andtime the action took place, and the priority of the item within the list.To resize columns, drag the separator for the column’s list control to the width you want, ordouble-click on the separator to automatically resize the column to fit the largest item in thecolumn.Displays the Status dialog box for the selected cause. If you do not have privileges to view thecause, this button is unavailable when you select the cause in the list; you cannot open theStatus dialog box for the cause.You can manually set the count for the number of personnel in the area covered on this dialogbox by changing the number in the Count value field and then clicking the Set count to button.(This changes the number displayed for the Personnel Count in the Area State box at the top ofthe dialog box.)Manually sets the personnel count for the area to the number you enter in the field below.Enter the number you want to set for the area.You can manually set the count for the number of personnel — from the group selected in theList of Personnel Groups for Area box — in this area by changing the number in the Countvalue field and then clicking the Set count to button. (This changes the number displayed in theCount field in the List of Personnel Groups for Area box.)Manually sets the personnel count from the selected group to the number you enter in the fieldbelow.Enter the number you want to set for the count from the selected personnel group in the area.You can manually set the count for the number of personnel — from the person type selected inthe Supervision Counts for Area box — in this area by changing the number in the Countvalue field and then clicking the Set count to button. (This changes the number displayed in theCount field in the Supervision Counts for Area box.)Manually sets the personnel count from the selected person type to the number you enter in thefield below.Enter the number you want to set for the count for personnel from the selected person type in thearea.C•CURE 800/8000 Monitoring Station User Guide 3–33