6 modules - PI-VR GmbH

6.1 Scene» Instant Mapping If instant mapping is enabled, changes to the texture projectionsettings will be interactively visible in the Viewport.» Show Support Geometry Shows a support geometry.» Visibility Sets the planar projection planes’ visibility.» Distance Sets the planar projection planes’ distance.» Place Texture 3D» Projection Center: Offers two ways for defining the projection center. You caneither pick the center manually or use the objects’s center.» Center (x,y,z): Sets the custom coordinates for the center of the projection.» Rotation: Sets the texture’s orientation. The rotation value defines the angle thetexture is rotated away from the projection plane’s orientation.» Place Texture 2D» Keep Aspect Ratio: Keeps the aspect ratio of the texture when projecting.» Scale Mode: Offers to scaling-modes.• Fit scale only• Fit scale and centre» Repeat: Sets the textures’ repetition on x- and y-axis.» Offset: Sets the textures’ offset value. The offset X(Y and Z) defines how far thetexture is shifted from the projections’ centre position on the x-, y- or z-axis.» Rotation: Sets the textures’ orientation. The rotation value defines the angle thetexture is rotated away from the projection planes’ orientation.111