6 modules - PI-VR GmbH

6 MODULES» Lines / Stripes The following settings allow to define the visual appearance of thelines on the surfaces.» Type: Defines the style that is used to display the analysis lines on the objectsurfaces.• Thin Lines: Uses thin sharp lines.• Stripes: Uses stripes that can be modified in their sharpness and thickness.• Zebra: Uses a classical zebra pattern.» Count: Defines the number of lines.» Color: Defines the color of the lines.» Surface These settings allow to define the visual appearance of the surfaces.» Lighting: Sets the lighting situation for the surfaces. For Isophotes, the surfacesare lit by the defined directional light. For Highlight/Reflection Lines, the surfacesare lit by a headlight.• Ambient: The surfaces are displayed single-colored. The color is defined byBase Color.• Diffuse: The surfaces are assumed to be diffuse. Set the diffuse reflectioncolor via Base Color.• Phong: The surfaces are lit with the phong lighting model. You can set thediffuse reflection color via Base Color, the glossy reflection color via GlossyColor and the roughness.• NURBS UV: Show the parameterization of nurbs surfaces. Triangle meshesare displayed in Ambient mode.200