6 modules - PI-VR GmbH

9 MATERIALS REFERENCE• Use ICC Profile: If turned on, the texture’s colors will be interpreted basedon an embedded color profile if present. If a color profile is missing, it isassumed that the colors are stored in sRGB.» Glossy Texture» Use Texture: Loads an image texture for the glossy color channel. Uses theimage as a pattern on the surfaces.• Repeat mode UV: Sets the repeat mode of the texture. There are fourmodes, which can be set:· Repeat: Repeats the texture in all directions.· Mirrored Repeat: Repeats and mirrors the texture on the x- and y-axiswith every repetition.· Decal: The texture will not be repeated.· Clamp: Repeats only the last pixel of the texture.• Repeat UV: Sets the number of repetitions for the UVs.• Offset UV: Sets the offset for the UVs.• Rotate: Rotates the UVs.• Anisotropy: Sets the texture filter quality for the image texture. Value 1 islowest quality. Value 16 is highest quality.• Input gamma: Sets the texture image gamma correction.• Use ICC Profile: If turned on, the texture’s colors will be interpreted basedon an embedded color profile if present. If a color profile is missing, it isassumed that the colors are stored in sRGB.» Roughness Texture Use a roughness texture for varying roughness values onthe surfaces. If a roughness texture is active the simple roughness slider losesits function. Instead you define how the texture values are mapped to roughnessvalues via a minimum and a maximum roughness value.266