6 modules - PI-VR GmbH

3 MENUS AND TOOLBARS• Save: Connector-server settings can be stored. Press the Save Settings button.» Connect to: Here, the connection settings can be entered, in case this VREDinstance is a connection-slave.• Server: Sets the server IP. If the VRED instances run on the same machine,simply enter localhost.• Port: Sets the communication port address.• Disconnect: Deactivates the connector.• Connect: Activates the connector. If connecting to the server fails, check ifthe port number matches and the server name is correct. Also ensure thatno firewall is blocking access.» Server: Here, the connection settings can be entered, in case this VRED instanceis a connection-server.• Port: Sets the communication port address.• Stop: Stops the connection-server.• Start: Starts the connection-server.» Annotation Opens the Annotation module. In the Annotation module, annotationscan be added to the scene.» Clipping Opens the Clipping module. Using the Clipping module, objects can beclipped for construction evaluation purposes. The Clipping module offers a varietyof clipping tools.» Measurement Opens the Measurement module. With the Measurement module,distances between objects, points, edges and more can be evaluated.» Sequencer Opens the Sequencer module. In the Sequencer it is possible to setup processes which can be used for specific interactions in the application or asbatch render setup.40