6 modules - PI-VR GmbH

8 CAD CONVERTER CLIand approximation to geometric details; a higher level typically also increasesthe number of triangles; default is tessqual=2• -surtol : surface tolerance:stol > 0.0: max. tessellation error is stol model units;stol = 0.0: surface tolerance is ignored for tessellation;stol < 0.0: => stol = |stol|*1/500*diag(bounding box(model));default is stol=-1• -nortol : normal tolerance: max angle between two adjacent trianglesof a tessellated surface; default is ntol=30• -maxEL : specifies the maximum edge length of a facet (triangle); defaultis mel=0.0 (to ignore max. edge length);• -adjust : OBSOLETE: this parameter has no effect on the conversion;AF_ADJUST NONE is always used, because other options breaks tolerancecontracts and causes other defects;» Comprehensive Help214» vCAD.exe: -i [-if ][-of ][-ao][-notFlatten][-minAcis][-opt ][-v][-vv][-log][-meta][-rep][-ses][-o ] [-oPath ][-iProEpath ][-filter ] [-childColors][-sew][-nurbs][-curves][-bin][-ascii][-surtol ] [-nortol ][-tq ][-gridMode][-triMode ] [-maxEL ][-edgeSagTol ][-maxGL ][-edgeQLevel ][-chk_gen_pcurves][-narrow_reg_repair][-minUGL ][-minVGL ][-aspectRatio ][-locale]» Help/Information:• -h: print help for standard usage• -hh: print comprehensive help• -v: verbose• -vv: ververbose• -opt : write CAD2Vis Options File