RoadRunner Owner's Manual - Data I/O Corporation

Operation • Supervisor Functions •• Event LogSupervisorFunctionsBoard or system timing. Instructions for performing the DAB test are in“Diagnosing with the Adapter Board” on page 5-5.Programmer allows disabling the Programmer Module.Exercise Display verifies that the display and keypad are working properly.When the keypad symbols are displayed in the screen, pressing eachcorresponding keypad button erases that image from the screen.Continuity Loop allows changing the number of continuity tests performedprior to programming a device.Event Log3The Event Log lists status messages for Data I/O engineers. If Timekeepingis switched ON, it also lists programming times for each process.Circled entriesare recordedonly if Timekeepingison.06/19/03 11:41:49; BoardAdapter; Current adapter actuation count = 24806/19/03 11:41:49; PG; 2 of 2 devices programmed06/19/03 11:41:49; ;Verify - 2.2607 sec06/19/03 11:41:49; ;Program - 5.4461 sec06/19/03 11:41:49; ;BlankCheck - 1.5480 sec06/19/03 11:41:49; ;Erase - 0.7084 sec06/19/03 11:41:39; PG; Erasing devices06/19/03 11:41:38; Alg; FPGA_F004: shift_clock: using divider =333306/19/03 11:41:38; Alg; FPGA_F004: device_clock: using divider =6Figure 3-24—Sample of the EVENTLOG.TXT file inthe FDROOT > System folder.ResultsView ResultsEndSelectIn addition to the number of devices Passed and Failed, the results listedin the Control Panel display under the Job > Results menu offer valuableinformation for tracking and ensuring optimum performance.The System Yld eliminates rejected devices from the yield statistics.The formula is: Devices placed on belt / (Devices picked from input +Devices dropped at input).The Prgmr Yld eliminates dropped devices from the yield statistics. Thisgives an indication of how well the RoadRunner programmer is performing.The formula is: Devices placed on belt / (Devices placed on belt + Devicesrejected).The Handler Yld is the overall yield. The formula is: (Devices placed onbelt + rejected) / (Devices picked at input + Dropped at input).Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010] 3—37