RoadRunner Owner's Manual - Data I/O Corporation

Troubleshooting • Error Messages •• Blue Lamp is OnLampColorError MessageCover tape broken.Data file is too large to fitin memory.ResolutionCAUSE A: COVER TAPE TAKE-UP REEL IS FULL• Empty the cover tape reel and rethread the cover tape.CAUSE B: THERE IS NO MORE INPUT MEDIA AVAILABLE• Install new input media.CAUSE C: COVER TAPE SENSOR IS MALFUNCTIONING• Contact Data I/O Customer Service.CAUSE D: COVER TAPE MODULE IS BROKEN• Replace the Cover Tape Take-Up Module.CAUSE E: COVER TAPE MODULE DRIVE BELT IS SLIPPING.• Remove the Cover Tape Module, re-tension the belt and replace theModule, or Contact Data I/O Customer Service.The device loaded may not be supported.Device continuity error. • Clean the sockets (See the daily maintenance schedule in chapter 5.)• Replace the socket adapter with a new one.• Increase the Place delayDevice dropped from head1.CAUSE A: TAPE POCKET IS MISALIGNED• Align the pocket tape.. . .bluelamp is on. . .Device dropped from head2.Device dropped from head3.Device dropped from head4.CAUSE B: HEAD IS MISALIGNED• Reteach the “Tape” parameter and/or the “Skt1” parameter.CAUSE C: WRONG OR MISALIGNED PRECISOR• Install the correct precisor (or position it correctly on the dowelpins); precisors are marked for corresponding device packages.CAUSE D: VACUUM SENSORS ARE OUT OF ADJUSTMENT• Adjust the vacuum sensors.CAUSE E: PROBE TIP IS NOT SEATED• Reinstall probe tip or replace.To continue, select Start on the keypad.See above. ↑See above. ↑See above. ↑6Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010] 6—9