RoadRunner Owner's Manual - Data I/O Corporation

Installation • Mounting the RoadRunner •• Mounting RoadRunner [Fuji QP242, QP351, IP3, XP142E]2Figure 2-10—The RoadRunner mounted onto a Multi Feeder Unit (MFU)CAUTION: Feeder carts might become unstable.RoadRunner can also be mounted on feeder carts andfeeder test stands. However, some carts/stands were notdesigned for the heavy overhang of RoadRunner andmay tip over easily, especially if the wheels encounter bumps. Usecaution; don’t use (and do label) unsafe carts.3. Slide RoadRunner forward until it comes to a solid stop. The nose willfit under the lip on the MFU.4. Lower RoadRunner fully to ensure that the steel angle under the conveyorsettles into the spring clamp on the MFU.SpringClampFigure 2-11—The angle bracket on RoadRunner fits into the MFU SpringClamp.5. Ensure that RoadRunner is secure.RoadRunner is now mounted to the Fuji MFU.Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010] 2—9