RoadRunner Owner's Manual - Data I/O Corporation

1Overview • Specifications [Fuji QP, IP, XP] •• –Specifications [Fuji QP, IP, XP]FACILITIESAC input voltage requirements 100-240 V~ ; 50/60 Hz (single phase)AC Input Power 100 W (max)Air requirements @ 2dm 3 /s (4.0scfm)Air Inlet tube (varies).52 MPa (75±2 psi)6 mm (.24 in.) &8 mm (.31 in.) OD min.MODELS SUPPORTEDFuji models supportedQP242, IP3, QP351, XP142EDIMENSIONSWidth 78 mm (3.1 in.)Weight (net) 14 kg (32 lbs)Length with 33 cm (13 in.) reel 91.5 cm (36 in.)Approximate length protrudingfrom SMT machine0 cm (0 in.)Height with 33 cm (13 in.) reel 49 cm (19.5 in.)Input tape width supported 16 mm; 24 mm; 32 mm (optional:12 mm, 32 mm-Large Format)DEVICE OUTPUT PLACEMENT (at SMT pickpoint)Output placement linear repeatability ±.25 mmOutput placement rotational repeatability ±5°ENVIRONMENTOperating temperature range 20–40°C (68–104°F)Temperature stabilization time after transportation ≥ 8 hHumidity 5–90%1—16 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]