RoadRunner Owner's Manual - Data I/O Corporation

Installation • Mounting the RoadRunner •• Mounting RoadRunner [Assembleon ACM]Mounting RoadRunner [Assembleon ACM]2Look ahead for mountinginstructions for yourspecific model ofRoadRunner.NOTE: The Assembleon RoadRunner must be mounted to a UniversalFeeder Table Adapter. Install a Universal Feeder Table Adapteronto the ACM machine before continuing.Also, the ACM upper feeder guide must be used.NOTE: When selecting slot positions forRoadRunner, consider that access to it isfrom the right side.To mount the RoadRunner onto the SMT machine feeder bank, perform thefollowing:1. Hold the RoadRunner level and rest the nose on the feeder bank. Ensurethat the guide under the conveyor settles into a slot.Figure 2-3—Mounting the RoadRunner onto a Feeder Bank Changer.CAUTION: Feeder carts might become unstable. TheRoadRunner can also be mounted on feeder carts andfeeder test stands. However, some carts/stands were notdesigned for the heavy overhang of the RoadRunner andmay tip over easily, especially if the wheels encounter bumps. Usecaution; don’t use (and do label) unsafe carts.2—4 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]