RoadRunner Owner's Manual - Data I/O Corporation

Troubleshooting • Problems, but no Error Message •• –Symptom Possible Cause Corrective ActionCover tape does not peel and storeproperly.Cover tape jams into Tape-In Module.Cover Tape Take-Up Reel is brokenor binding.The Cover Tape Module clutchassembly is malfunctioning.Cover Tape Module drive belt isloose and slipping.Cover tape broken or twisted or slipping.Loose or bad connection to theTake-Up Motor.The Broken Tape Sensor is malfunctioning.Cover tape not pulled tight whenloading.• Inspect and replace if necessary.See “Removing the Cover TapeModule” in the Service Manual.• Inspect and replace if necessary.See “Removing the Cover TapeModule” in the Service Manual.• Adjust drive belt tension orremove module and replace.• Remove and reload covertape.Use adhesive tape if slipping.• Inspect and replace Cover TapeModule if necessary• Inspect connection; replace sensorif necessary.• Pull cover tape tightly when loadingit onto the Cover Tape Reel.Ensure cover tape is fullyremoved from exposed tape in theTape-In Module.66—16 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]