JMA-5300MkIIsm

INDEX > 6.Troubleshooting > 6.1 Operation Tests
2) Buzzer Test
Tests the buzzer of the operation unit.
The buzzer sounds.
After a set period of time, the buzzer automatically goes off.
3) Light Test
Tests the light in the operation unit.
The light in the operation unit gets progressively brighter in four stages.
6.1.5 Performance Monitor (MON Display)
Shows the status of the performance monitor.
* Transmitter System Tests the transmitter attenuation.
6
Attenuation Value
* Receiver System Tests the receiver attenuation.
MON Pattern Range
Attenuation Value
When checking the transmitter attenuation, read the values one minute after opening this
menu item.
操 作 手 順
1) Turn the "VRM" dial to place the VRM at the farthest edge of the
performance monitor pattern.
The receiver attenuation appears for the Attenuation Value of the Receiver System.
6-5