JMA-5300MkIIsm

INDEX > 4.Replacement Procedure > 4.2 Scanner Unit NKE-1130 (JMA-5332-12)
• Fan for motor driver circuit board
• Encoder
• Brake control circuit board
To replace the motor, remove the covers on both sides.
3) Follow the procedure provided in the following sections to replace the necessary parts.
Be careful not to lose removed screws and metal fittings.
4) After replacing the parts, return the pedestal cover to its original place and turn on the
safety switch (do not forget to put the cover back on).
Make sure that there is no foreign matter or dust adhered to the gasket when you put the cover
on.
5) Turn on the radar power supply and check that the system works properly.
4
4-3