JMA-5300MkIIsm

INDEX > 2.System Configulation > 2.5 DIP-SW / Jumper Selection
2.5.3 Radar Process Circuit CDC-1332
1) S301
A 4-bit DIP-SW. Do not alter the
factory default setting shown below.
1: ON(alteration prohibited)
2: ON(alteration prohibited)
3: OFF(alteration prohibited)
4: OFF(alteration prohibited)
S300
S301
2
2) S300
A 6-bit DIP-SW. The factory default
settings are all OFF. Do not alter the
settings.
1: OFF(alteration prohibited)
2: OFF(alteration prohibited)
3: OFF(alteration prohibited)
4: OFF(alteration prohibited)
5: OFF(alteration prohibited)
6: OFF(alteration prohibited)
Fig.2-10: CDC-1332 DIPSW
2.5.4 AIS Process Circuit NQA-2103
1) S300
A 4-bit DIP-SW. Do not alter
the factory default settings
shown below.
1: OFF(alteration prohibited)
2: OFF(alteration prohibited)
3: OFF(alteration prohibited)
4: OFF(alteration prohibited)
Fig.2-11: NQA-2103 DIPSW
2-23