ComputerAided_Design_Engineering_amp_Manufactur.pdf

Acknowledgements
The work reported here has been done at Indian Institute of Technology, New Delhi. The majority of
the work reported is done under the sponsorship of the Department of Electronics, Government of
India, over a period of five years. A large number of students (A.V.S.R.K. Prasad, G. Manidhar, Vijay
Arora, S.K. Gupta, and others) have worked in this period for their masters and doctoral programs in
the area of CAPP and are responsible for developing part of the ideas. The assistance received from
Bharat Heavy Electricals Limited, Bhopal, in the system development and proving is gratefully acknowledged.
References
1. Arora, V., 1991, Pocket Identification and Setup Planning in Computer Aided Process Planning of
Rotational Parts, Unpublished M. Tech. Thesis, NC Laboratory, Department of Mechanical Engineering,
Indian Institute of Technology, New Delhi, India.
2. Balakrishnan, P. and DeVries, M. F., 1982, A review of computerized machinability data base
systems. Proceedings of 10th North American Manufacturing Research Conference, 348–386.
3. Beightler, C. S. and Phillips, D. T., 1976, Applied Geometric Programming, John Wiley and Sons,
Inc, NY.
4. Brewer, R. C. and Rueda, R., 1963, A simplified approach to the optimum selection of machining
parameters. Engineers’ Digest, 24(9), 133–151.
5. Brown, R. H., 1962, On the selection of economical machining rates. International Journal Production
Research, 1(1), 1–22.
6. Butterfield, W. R., Green, M. K., Scott, D. C., and Stoker, W. J., 1986, Part features for process
planning, CAM-I report: C-85-PPP-03.
7. Case, K. and Gao, J., 1993, Feature technology: an overview, Int. J. Computer Integrated Manufacturing,
6(1&2), 2–12.
8. Chandrupatla, T. R. and Belegundu, A. D., 1991, Introduction to Finite Elements in Engineering,
Prentice-Hall, New Delhi.
9. Chang, T. C. and Wysk, R. A., 1981, An integrated CAD/automated process planning system, AIIE
Transactions, 13(3), 223–233.
10. Chang, T. C. and Wysk, R. A., 1984, Integrating CAD and CAM through automated process
planning, International Journal of Production Research, 22(5), 877–894.
11. Chen, S. J., Hinduja, S., and Barrow, G., 1989, Automatic tool selection for rough turning operations,
Int. Journal of Machine Tools and Manufacture, 29(4), 535–553.
12. Chua, M. S., Loh, H. T., Wong, Y. S., and Rahman, M., 1991, Optimization of cutting conditions
for multipass turning operations using sequential quadratic programming. Journal of Materials
Processing Technology, 28(1/2), 253–262.
13. Clark, A. C. and South, N. E., 1987, Feature based design of mechanical parts, Proc. AUTOFACT
87, 169–176.
14. Colding, B. N., 1992, Intelligent selection of machining parameters for metal cutting operations:
the least expensive way to increase productivity. Robotics & Computer Integrated Manufacturing,
9(4/5), 407–412.
15. Crookall, J. R., 1969, The performance-envelope concept in the economics of machining. International
Journal of Machine Tool Design and Research, 9, 261–278.
16. Cunningham, J. J. and Dixon, J. R., 1988, Designing with features: the origin of features, Proc. ASME
Computers in Engineering Conf., v. 1, San Francisco, USA, 237–243.
17. Dixon, J. R., Cunningham, J. J., and Simmons, M. K., 1987, Research in designing with features,
Intelligent CAD, I, (Ed.), Yoshikawa, H. and Gossard, D., Proc. IFIP TC5/WG 5.2 Workshop on
Intelligent CAD, Boston, MA, 137–148.