Devcon Maintenance and Repair Solutions - Sintemar

More documents

Recommendations

Info

Field Application Reports Location 100 Tank Coating Products: Floor Patch, Epoxy Concrete Sealer, Application Date: Flexane® FC Liquid Application Customer: Date: 11-18-96 Customer: Industry: Mutual Manufacturing Company Industry: General Manufacturing of Piping Problem: Passivation tank and concrete pad needs to be coated for chemical protection against H2 SO4 in slight concentrations in water. They previously used rubber linings in the tank, but the process is very costly. Solution: First they blasted off all existing rubber liner in the containment area and rinsed thoroughly several times and neutralized the concrete. All worn concrete areas were regrouted with Floor Patch. Then Epoxy Concrete Sealer was used (8-10 mils thick) to coat entire containment area. Flexane Fast Cure #15050 was next injected into the control joints to seal the joints, and a second coat of Epoxy Sealer was used for the final coat. This tank is now a sealed chemical resistant liner which will not leak any liquid into the environment.
Field Application Reports Products: Application Date: Customer: Industry: Location 101 Floor Repair Floor Patch Fast Cure / Flexane ® Fast Cure Liquid 8/23/96 Certified Foods Agriculture Food Processing Problem: Over several years of service, water contamination and traffic have caused the concrete to become spalled and eroded. Corrosion has also caused the handrail to become dislodged from the concrete. Solution: Loose concrete was removed using a grinder and wire wheel attachment. Solid concrete was then roughened. Forms were manufactured from metal and placed into position around the repair areas. Duct tape was used to hold the forms in place. Devcon’s Release Agent was applied to the forms for easy removal following partial cure of Floor Patch Fast Cure. Release agent must be used for easy part or form removal. An oversized metal pipe extension was positioned around the existing rail. Wood wedges were positioned to center the rail within the pipe extension. Floor Patch Fast Cure, (90 minute functional cure), was applied to rebuild missing concrete. Following a partial cure of Floor Patch fast Cure, (15 minutes), the metal forms were removed. FL10 Primer was applied to the metal rail and pipe. Flexane 80 Liquid Fast Cure, (90 minute functional cure), was injected as a flexible filler between the pipe and rail. Flexane 80 Liquid will remain flexible, (350% elongation), while resisting freeze thaw cycles caused by seasonal weather changes.
Page 1 and 2:
Field Application Reports Products:
Page 3 and 4:
Field Application Reports Power Pla
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Field Application Reports Problem:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Field Application Reports Location
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Field Application Reports Location
Page 51 and 52: Field Application Reports Products:
Page 67 and 68: Field Application Reports Location
Page 101: Field Application Reports Products:
Page 141: Field Application Reports Products:
show all

Devcon Maintenance and Repair Solutions - Sintemar

Create successful ePaper yourself

Delete template?

Save as template?