Devcon Maintenance and Repair Solutions - Sintemar

More documents

Recommendations

Info

Field Application Reports Products: Application Date: Customer: Industry: Location 104 Pump Repair Titanium Putty 29/3/85 Smith College Power Plant Utility Power Generation Problem: The stuffing box area of this Bell and Gosset pump would receive extreme wear from a slurry combination of water and fly ash. Previous method of repair was to grind damaged areas and rebuild with gasket or packing material. Solution: Complete repair areas were sandblasted to a SSPC-SP5 white metal finish. Surfaces were chemically cleaned using Cleaner Blend 300. Small holes were drilled in stategical positions to establish a mechanical bond and anchor Titanium Putty. A dummy shaft was machined and used as a mold to shape bearing seat areas. Titanium Putty was mixed and applied to repair areas. The dummy shaft was coated generously with Devcon’s Release Agent and placed into position. Release agent must be applied for ease in part or mold separation. Following a full cure of Titanium Putty, (24 hours), the dummy shaft was removed.Repair areas were then lightly sanded to remove leading edges. Pump was assembled and returned to service.
Field Application Reports Products: Application Date: Customer: Industry: Location 105 Floor Coating Epoxy Concrete Sealer 100 / Anti Skid Silica 6/1/96 Pilgrim State Hospital Building Maintenance Problem: Shower stalls within this hospital used abrasive tape in an effort to provide a safe non skid floor surface. The abrasive tape would usually peel off within only a few weeks. Solution: Floor surface was mechanically roughened to remove all traces of abrasive tape and provide a profile for epoxy coating. Complete floor surface was chemically cleaned using Cleaner Blend 300. Epoxy Sealer was then premixed. Anti Skid Silica was added to the mixed Epoxy Sealer. Epoxy Sealer with Anti Skid Silica was applied to a thickness of 10-12 mils. Epoxy Concrete Sealer provided a clear, water resistant, non skid surface to these shower stalls.
Page 1 and 2:
Field Application Reports Products:
Page 3 and 4:
Field Application Reports Power Pla
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Field Application Reports Problem:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Field Application Reports Location
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Field Application Reports Location
Page 51 and 52:
Page 53 and 54:
Page 55 and 56: Field Application Reports Products:
Page 67 and 68: Field Application Reports Location
Page 105: Field Application Reports Products:
Page 141: Field Application Reports Products:
show all

Devcon Maintenance and Repair Solutions - Sintemar

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?