Devcon Maintenance and Repair Solutions - Sintemar

More documents

Recommendations

Info

Field Application Reports Products: Application Date: Customer: Industry: Location 122 Concrete Floor Repair Floor Patch FC, Flexane ® FC Liquid July 2003 Walt Disney World Amusement Park Problem: Concrete in a heavily traveled area cracking and falling apart due to heavy traffic and wear. The expansion joint also needed to be repaired. Solution: Damaged concrete was chiseled out, squaring the edges for a locked, “feathered edge”. Floor Patch FC was used as the area needed to be back in service quickly. Floor Patch FC was mixed/applied into area and troweled smoothly. The expansion joint was cleaned out to a minimum ½” depth and FL-20 Primer was applied in a thin, uniformed coating along the entire expansion joint. This was followed using a portable air tank and a 400ml pneumatic applicator, (4:1 ratio) with a Flexane FC liquid cartridge, and a 400ml mix nozzle. A uniform self-leveling bead was applied and allowed to level until the filled expansion joint was just below the concrete surface for a smooth transition for vehicles traveling across this joint.
Field Application Reports Location 123 Floor Coating Products: Flexane® 80 Liquid / Concrete Primer / Application Date: Epoxy Concrete Sealer 100 Application Customer: Date: 7/29/96 Customer: Industry: Linkbelt Construction Industry: Building Maintenance Problem: This waste chemical storage room required protection from mild chemicals such as glycol, oils and solvents. The storage room floor had not been previously coated and had a number of expansion joint cracks. Chemicals could possibly seep through the floor and contaminate the groundwater. Solution: Complete floor area was acid etched using Devcon’s B-4 Citrus Acid Etch. Once the floor had completely dried the floor was vacuum cleaned. All expansion joint cracks were filled using Flexane 80 Liquid Fast Cure (90 minute functional cure). Flexane 80 Liquid Fast Cure will remain flexible, (350% Elongation), and cushion concrete movement due to thermal cycling. Following a 2 hour cure of Flexane 80 liquid Fast Cure, Concrete Primer was applied to a thickness of 5 mils using a 1/8” nap paint roller. Following a partial cure, (4 hours), Epoxy Sealer was applied to a thickness of 12 mils using a 1/8” nap paint roller.
Page 1 and 2:
Field Application Reports Products:
Page 3 and 4:
Field Application Reports Power Pla
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Field Application Reports Problem:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Field Application Reports Location
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74: Field Application Reports Products:
Page 109 and 110: Field Application Reports Location
Page 123: Field Application Reports Products:
Page 131 and 132: Field Application Reports Location
Page 141: Field Application Reports Products:
show all

Devcon Maintenance and Repair Solutions - Sintemar

Create successful ePaper yourself

Delete template?

Save as template?