Devcon Maintenance and Repair Solutions - Sintemar

More documents

Recommendations

Info

Field Application Reports Problem: Products: Application Date: Customer: Industry: Location 94 Floor Coating Epoxy Coat 6000 NON VOC 9/13/96 B.C. Bearing Engineers Building Maintenance New warehouse addition required protective coating to maintain floor integrity and reduce dust. Solution: Complete surface was first roughened to create a profile using a Blas-Trac machine. Surface was then vacuum cleaned to remove all dust. Floor Patch was applied to repair pot holes and chips from newly poured concrete. Epoxy Coat 6000 was applied using a 1/8” nap paint roller to a thickness of 8 mils. A second coat was applied to a thickness of 8 mils due to the absorption of the first coat into the porous concrete floor. The finish product was a 10-12 mils tough warehouse floor.
Field Application Reports Products: Application Date: Customer: Industry: Location 95 Sump Repair B-4 Etcher, Epoxy Concrete Sealer 11-25-96 Link Belt Contractor OEM Contractor Equipment Problem: The milling machine’s sump has corroded over time. The customer needed to line the interior of the concrete sump area of the milling machine. The concrete has been compromised and cutting fluids are leaking from sump area. This poses environmental concerns. Solution: Degrease sump area with high pressure washer. Etch concrete with B-4 Etcher #13500. Pour Epoxy Concrete Sealer into sump area and back roll vertical surfaces. The epoxy will penetrate concrete and fill all voids, leaving a smooth non-porous surface. Water soluble cutting fluids will not penetrate the coating, therefore sealing sump area.
Page 1 and 2:
Field Application Reports Products:
Page 3 and 4:
Field Application Reports Power Pla
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Field Application Reports Problem:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Field Application Reports Location
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46: Field Application Reports Products:
Page 49 and 50: Field Application Reports Location
Page 95: Field Application Reports Products:
Page 141: Field Application Reports Products:
show all

Devcon Maintenance and Repair Solutions - Sintemar

Create successful ePaper yourself

Delete template?

Save as template?