Devcon Maintenance and Repair Solutions - Sintemar

More documents

Recommendations

Info

Field Application Reports Products: Application Date: Customer: Industry: Location 124 Rubber Roll Repair Flexane ® Belt Repair Kit June 2003 Circle C Equipment Agriculture Problem: Farmers use rubber rolls to flatten hay in order to speed up the drying process of the hay. Occasionally rocks will tear apart sections of these rolls reducing their effectiveness to dry the hay. Resurfacing the roll with new rubber has an estimated cost of $1,500, besides enormous “downtime” as the farmer must send the roll to the shop to be resurfaced. This “do-it-yourself” system would allow the farmer to repair the roll the same day. Solution: Devcon’s Flexane Belt Repair Kit is a complete “do-it-yourself” system that a farmer can repair the rolls themselves. All repair areas were sandblasted or abraded using a wire brush. Next, Cleaner Blend 300 was applied to the metal roll to thoroughly clean all contaminants. FL-10 is used to prime the metal roll while FL-20 is used to prime areas that will come in contact with the existing rubber surface. Flexane 80 Putty is then applied to the roll core building up to the existing roll. Grooves are then made in the Flexane 80 prior to setting up to match the existing rubber roll. Farmers now repair their rubber rolls in 24 hours! Devcon’s repair cost per roll is $100. While sending them out for repair averages $1,500. A major cost savings for the farmer.
Field Application Reports Products: Application Date: Customer: Industry: Location 125 Broom Box Chute Coating Flexane® High Performance Brushable 8/4/92 Norfolk and Southern Railroad Transportation Rail Problem: These Broom Box Chutes would receive extreme corrosion and impact abrasion wear from processing limestone particulate. The wear was so excessive that the chute required replacement annually. Solution: Complete repair or coating area was sandblasted to a SSPC-SP5 white metal finish. Surfaces were then chemically cleaned using Cleaner Blend 300. Both FL10 and FL20 Primers were applied and each allowed to cure or dry for 15 minutes. Using both primers will improve mechanical adhesion of Flexane High Performance Brushable from 25 pli to 50 pli.. Flexane High Performance Brushable was applied to a thickness of 25 mils. Flexane High Performance Brushable provided a long lasting, impact resistant protective surface lining.
Page 1 and 2:
Field Application Reports Products:
Page 3 and 4:
Field Application Reports Power Pla
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Field Application Reports Problem:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Field Application Reports Location
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76: Field Application Reports Products:
Page 109 and 110: Field Application Reports Location
Page 125: Field Application Reports Location
Page 131 and 132: Field Application Reports Location
Page 141: Field Application Reports Products:
show all

Devcon Maintenance and Repair Solutions - Sintemar

Create successful ePaper yourself

Delete template?

Save as template?